EasyManua.ls Logo

Samsung AG070KSVANH - User Manual

Samsung AG070KSVANH
142 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1. Precautions
2. Product Features and Specifications
3. Disassembly and Reassembly
4. Troubleshooting
5. PCB Diagram and Parts List
6. Wiring Diagram
7. Cycle Diagram
8. Key Options
9. Trial Operation
CONTENTSDVM CHILLER
DVM CHILLER
AG042KSVANH/AG056KSVANH/AG070KSVANH
AG042KSVGNH/AG056KSVGNH/AG070KSVGNH
SYSTEM AIR CONDITIONER

Table of Contents

Other manuals for Samsung AG070KSVANH

Preview: Installation Manual
Installation Manual114 pages

Questions and Answers

  • R
    Richard CoxAug 9, 2025
    Why is my Samsung Chiller making noise?
    • C
      Christopher FrazierAug 9, 2025
      The noise you're hearing from your Samsung Chiller could be due to several reasons: * If the noise is continuous during cooling or defrost, it might be the sound of the refrigerant gas running inside the unit. * If the noise occurs when starting, defrosting, or stopping the chiller, it could be the flow stopping or changing direction. * If the noise is different, it could be due to the compressor's frequency changing.
  • J
    James BakerAug 16, 2025
    Why is the defrost operation on my Samsung Chiller taking so long?
    • E
      Elizabeth CombsAug 16, 2025
      If the defrost operation on your Samsung Chiller is taking longer than expected during heating, it could be because of the amount of frost accumulated on the heat exchanger. Defrost operation may get longer at most 15 minutes depending on amount of frost complied on heat exchanger of the product.
  • K
    Karen ZimmermanAug 23, 2025
    Why is there frost on the heat exchanger of my Samsung Chiller?
    • J
      Jerry AnthonyAug 23, 2025
      The appearance of frost on the heat exchanger of your Samsung Chiller during heating operation is normal. It happens because the surface temperature of the heat exchanger drops as the refrigerant inside absorbs heat, causing evaporation.
  • A
    Amy AndersonAug 31, 2025
    Why is the compressor of my Samsung Chiller heated when it is not running?
    • H
      heather45Aug 31, 2025
      The compressor in your Samsung Chiller is heated for starting operation.

Summary

Precautions

1-1 Precautions for the Service

General guidelines for safe and effective servicing procedures.

1-2 Precautions for the Static Electricity and PL

Measures to prevent damage from static discharge and electrostatic hazards.

1-3 Precautions for the Safety

Critical safety instructions for handling the equipment and its components.

1-4 Precautions for Handling Refrigerant

Safe procedures for managing refrigerants, including environmental and personal safety.

1-5 Precautions for Welding

Guidelines for safe and proper welding techniques on the system.

Product Features and Specifications

Disassembly and Reassembly

3-1 Necessary Tools

Lists all tools required for maintenance and repair tasks.

3-2 Disassembly and Reassembly

Step-by-step guide for disassembling and reassembling unit components.

3-2-1 AG042;056;070 KSV

3-3 Service work of main parts

Procedures for servicing critical components of the system.

3-3-1 Water Pump

3-3-2 Temperature sensor & Pressure sensor in the water pipe side

3-3-3 Plate type heat exchanger PHE

Troubleshooting

4-1 Check-up Window Description

4-2 Service Operation

4-3 Appropriate measures for symptoms

Provides troubleshooting steps and solutions for identified problems.

Key Options

Trial Operation

9-1 Trial operation for each CHILLER unit

Procedures for performing initial startup and operational tests on the chiller.

Samsung AG070KSVANH Specifications

General IconGeneral
RefrigerantR410A
Cooling Capacity (kW)7.0 kW
Heating Capacity (kW)8.0 kW
Heating Capacity (BTU/h)27300 BTU/h
Power Supply220-240V/50Hz/1Phase

Related product manuals