Why the temperature does not change on my Samsung Air Conditioner?
If the temperature on your Samsung Air Conditioner isn't changing, it might be running in Fan mode. In Fan mode, the fan coil unit controls the set temperature automatically, preventing you from manually adjusting it.
What to do if my Samsung Air Conditioner fan coil unit does not operate at all?
If your Samsung Air Conditioner's fan coil unit isn't operating, first check if the power plug is properly connected. Also, verify that the auxiliary power switch (MCCB, ELB) is turned on. The unit won't work if this switch is off, even if you press the Power button. Finally, if the unit was turned off by the Timed off function, press the Power button again to turn it back on.
Why is my Samsung Air Conditioner not cool or warm enough?
If the air from your Samsung Air Conditioner isn't cool enough in Cool mode, ensure the set temperature is lower than the current temperature. For MR-EH00 remote controls, repeatedly press the Temperature button until the set temperature is at least 18°C. For AR-KH00E remote controls, press the Temperature button and rotate the Wheel until the set temperature is at least 18°C. If the air isn't warm enough in Heat mode, make sure the set temperature is higher than the current temperature. For MR-EH00 remote controls, repeatedly press the Temperature button until the set temperature is at most 30°C. For AR-KH00E remote controls, press the Temperature button and rotate the Wheel until the set temperature is at most 30°C. Also, a dirty air filter, direct sunlight, or open windows and doors can...
Details the function and indicators of the unit's display panel.
Explains the operation and control of the air flow blades for different models.
Covers the different panel types and their features.
Identifies and describes the air intake, front grille, and internal air filter.
Details the location and function of the remote control sensor.
Explains the air outlet component of the fan coil unit.
Lists and explains the various indicators for operation status and filter cleaning.
Specifies the recommended indoor temperature and humidity ranges for optimal operation.
Provides instructions on how to clean the exterior surfaces of the fan coil unit.
Guides on detaching, cleaning, and reassembling the air filter.
Outlines a schedule for regular maintenance tasks and required professionals.
Lists checks and solutions for when the fan coil unit fails to start.
Addresses problems related to incorrect temperature settings or insufficient cooling/heating.
Solutions for issues with fan speed and air flow blade movement.
Troubleshooting steps for non-responsive wireless or wired remote controls.
Solutions for errors with timing functions and blinking display indicators.
Addresses common issues like strange noises, condensation, and unpleasant odors.
General| Capacity (Cooling, Btu/hr) | 12000 |
|---|---|
| Capacity (Cooling, kW) | 3.5 |
| Power Source (Φ/V/Hz) | 1/220-240/50 |
| Refrigerant | R410A |
| Indoor Unit Dimensions (WxHxD) | 820 x 285 x 215 mm |
| Outdoor Unit Dimensions (WxHxD) | 660 x 475 x 242 mm |
| Indoor Unit Weight | 16.2 kg |
| Outdoor Unit Weight | 30 kg |
To Next Page
