Changing Your Settings 97
Current Country
The
Current Country
menu allows you to select your current
location.
Note:
If you travel to a different country, the network may not report the
correct location. In that case, you will see a pop-up message that
states “
PLEASE VERIFY YOUR CURRENT LOCATION
”.
Press to access the country selection list.
1. Open the flip in portrait mode and press
MENU
. Press
the
Directional key to highlight the Settings &
Tools menu and press .
2. Press Phone Settings.
3. Press Current Country.
4. If your current location is not highlighted, press the
Directional key up or down to highlight the appropriate
country and press .
Security
The
Security
menu allows you to lock your phone, set
restrictions, and other security options.
1. Open the flip in portrait mode and press
MENU
. Press
the
Directional key to highlight the Settings &
Tools menu and press .
2. Press Phone Settings.
3. Press Security.
4. Enter the lock code (factory settings are the last four digits
of your telephone number) and press . The following
options appear in the display:
•Edit Codes
: Allows you to change the Lock Code for Phone Only or
Calls & Services.
• Restrictions
: Allows you to restrict the Location Setting
(Lock/Unlock Setting), Calls (Incoming or Outgoing Calls),
Messages (Incoming or Outgoing Messages), Dial-Up Modem
(Allow or Block).
• Phone Lock Setting
: Allows you to set the phone to Unlocked or
lock the phone On Power Up.
•Lock Phone Now
: Allows you to lock the handset.
•Restore Phone
: All settings are reset to factory default settings
and all user data is erased including pictures, music, messages,
contacts, and downloaded applications stored on the phone.
To Next Page
Loading...
