46
Note:
If the call was incoming and Caller ID information was unavailable,
then the store option is also unavailable.
1. After you press to end your call, the call time, length
of call and phone number appears in the display.
2. Press the right soft key Save. You’re prompted to
select Add New Contact, or Update Existing. Follow the
on-screen prompts to designate other information.
Adding Pauses
Calls to automated systems often require a password or account
number. Instead of manually entering numbers each time, store
the numbers to your Contacts along with special characters
called pauses.
1. From the Home screen, enter the number.
2. Press the right soft key Options to highlight
Add
2-Sec Pause (a “P” appears in the display) or
Add
Wait
(a “W” appears in the display) and press .
• 2-Sec Pause
: A two-second pause stops the calling sequence for
two seconds and then automatically sends the remaining digits.
•Wait
: A hard pause stops the calling sequence until further input
from you.
3. When you’re finished entering information for the entry,
press the left soft key SAVE.
4. Continue with Step 2, Method 2 for Adding a number to a
new or existing Contact from the Home screen. See
“Adding a number to a new or existing Contact from the
Home screen” on page 44.
Note:
Entering multiple Add 2-sec Pause extends the length of a pause. For
example, two consecutive Add Pauses cause a total pause time of four
seconds. Keep in mind pauses count as digits towards the 48-digit
maximum.
Contact Groups
You can place Contact entries into categories, called “
Groups
.”
Groups allow you to search your Contacts faster, quickly send
messages to one or more group members, and more.
Note:
Contacts can be a member of more than one group. So you must
unmark any group previously selected to remove the Contact from that
group.
View Groups
1. Open the flip in portrait mode and press
MENU
. Press
the
Directional key to highlight the Contacts
menu and press .
OK
To Next Page
Loading...
