Call Functions 29
4.
“Please say the name, number, voice mail or last number”
plays through the earpiece or speakerphone.
5. After the beep, say the area code and number that you
want to dial into the microphone, clearly and naturally.
6. The number that you said is repeated through the speaker
and your phone dials the number.
7. If Voice Commands is not sure of the number that you said,
a list of possible matches appears in the display.
8. You’re asked to confirm the correct number as Voice
Commands displays the results.
•
Say “
Yes
” to confirm the number.
•
Say “
No
” to reject the number.
•
Say “
Repeat
” to have the selected number read one more time.
Call Name Dialing
To use Name Dial, you’ll need to have entries stored in your
Contacts list. See page 43 for information on creating a Contacts
list.
1. From the Home screen, press the Voice Commands key
.
2. After a brief pause, a list of optional commands appears in
the display and the audio prompt “Please say a command”
plays through the earpiece or speakerphone.
3. After the beep, say “Call” at a distance of 3-12 inches from
the phone in a natural voice.
4. “Please say the name, number, voice mail or last number”
plays through the earpiece or speakerphone.
5. To use Name Dialing, after the beep, say the name of the
contact that you want to dial.
6. The name that you said is repeated through the speaker
and your phone dials the number.
7. If Voice Commands is not sure of the number that you said,
a list of possible matches appears in the display.
8. You’re asked to confirm the correct number as Voice
Commands displays the results.
•
Say “
Yes
” to confirm the number.
•
Say “
No
” to reject the number.
•
Say “
Repeat
” to have the selected number read one more time.
u750.book Page 29 Sunday, April 5, 2009 8:40 PM
To Next Page
Loading...
