Samsung AM BXV Series - Setting outdoor unit option switch and key function; Setting outdoor install option

48
English
Installation Procedure
Setting outdoor unit option switches
• Setting outdoor install option
Step Button Display Description Note
Start
Outdoor unit address
Quantity of indoor units
Main unit?
No
No
Yes
Yes
Save
Heat recovery?
Quantity of MCUs
Outdoor unit address
Step1 Outdoor unit display
Setting required -
Step2
Press (K1+K2) for 2
seconds
Unit address for
module combination
00: Main unit
K4 x 1 time
01: Sub1 unit
K4 x 2 times
02: Sub2 unit
K4 x 3 times
03: Sub3 unit
Step3
If it is main unit, go to step4.
Otherwise, press K2 button for 2 seconds to save & exit
(system will be reset)
Quantity of indoor units
Step4 Press K1
Ready to set -
Step5
K2 x n times
X
Ɵʪϑʒ˝ϩ࣑ߢߨ࣒
Ex) 03: 3 units
64: 64 units
K4 x n times
X
Įʪϑʒ˝ϩ࣑ߢ࣒߫
* K4: Press for 2 seconds - automatic detection of indoor units’ quantity
Step6
If it is heat recovery model, go to step 7.
Otherwise, press K2 button for 2 seconds to save & exit
(system will be reset)
Quantity of MCUs * Heat recovery model only
Step7 Press K1
Ready to set -
Step8
K2 x n times
X
Ɵʪϑʒ˝ϩ࣑ߢߣ࣒
Ex) 03: 3 units
16: 16 units
K4 x n times
X
Įʪϑʒ˝ϩ࣑ߢ࣒߫
* K4: Press for 2 seconds - automatic detection of MCUs' quantity
Step9 K2: long
Save Restart
* Press K1 for 2 seconds to exit without save regardless of setting step.
Setting outdoor unit option switch and key function
ki]_TXX\_XhTWWptk}tGzYGvhhluUGGG[_ YWYYTWXTYWGGG㝘䟸G[a\_aZZ