52
English
Troubleshooting
Installation manual
Option SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
Explanation PAGE
Individual control of a
remote controller
Heating setting compensation / Removing
condensate water in heating mode
Adjusted EEV step of
stopped unit during
oil return /defrost
mode.
Setting the MDS Kit installation option -
Indication
and Details
Indication Details Indication Details Indication
Details
Indication Details Indication Details
-
Heating Setting
Compensation
Removing
Condensate
Water in Heating
Mode
3
0 or 1 channel 1
0 Default Disuse
0 Default
0
Disuse
(Soft Off+Hard off) (*8)
1 2 °C Disuse 1
Off after 20 min.
(Soft Off+Hard off)
2 channel 2
2 5 °C Disuse 2
Off after 40 min.
(Soft Off+Hard off)
3 Default Use (*7)
3
Off after 80 min.
(Soft Off+Hard off)
4
Off after 20 min.
(Soft Off+Hard off)
3 channel 3
5
Off after 40 min.
(Soft Off+Hard off)
4 2 °C Use (*7)
1
Adjusted
EEV
positon
6
Off after 80 min.
(Soft Off+Hard off)
7
Off after 20 min.
(Soft Off only) (*9)
4 channel 4
8
Off after 40 min.
(Soft Off only)
9
Off after 80 min.
(Soft Off only)
5 5 °C Use (*7)
A
Off after 20 min.
(Soft Off only)
B
Off after 40 min.
(Soft Off only)
C
Off after 80 min.
(Soft Off only)
Setting an indoor unit address and installation option