Samsung AM DNCDKG Series - Page 55

55
English
Installation manual
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Explanation PAGE
(When setting SEG3)
Standard for mode

Heating
(When setting SEG3)
Time required for
mode change
Compensation option
for Long pipe or height
difference between indoor
units
MTFC (*3) -
Indication
and Details
Indication Details Indication Details Indication Details Indication Details Indication Details
1
0 1°C 0 5 min. 0 Default
0 Default
1 1.5°C 1 7 min.
1
(*1) Height
difference is
more than
30m or (*2)
Distance is
longer than
110m
2 2°C 2 9 min.
3 2.5°C 3 11 min.
4 3°C 4 13 min.
2
(*1) Height
difference is
15~30m or
(*2) Distance
is 50~110m
2 Use
5 3.5°C 5 15 min.
6 4°C 6 20 min.
7 4.5°C 7 30 min.
Option SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
Explanation - -
Dual fuel (heater lock)
setting
Dual fuel (HP lock)
setting
-
Control variables when using hot water / external heater
(*4)
Indication
and Details
Indication Details - Indication Detail Indication Detail - Indication
Details
0 Disuse
2 -
0 Disuse 0 Disuse
-
0
At the same
time as
thermo on
No delay
1  1  1
At the same
time as
thermo on
10 minutes
2  2  2
At the same
time as
thermo on
20 minutes
3  3  3 1.5 °C No delay
4  4  4 1.5 °C 10 minutes
5  5  5 1.5 °C 20 minutes
6  6  6 3.0 °C No delay
7  7  7 3.0 °C 10 minutes
8  8  8 3.0 °C 20 minutes
9  9  9 4.5 °C No delay
A  A  A 4.5 °C 10 minutes
B  B  B 4.5 °C 20 minutes
C  C  C 6.0 °C No delay
D  D  D 6.0 °C 10 minutes
E  E 
E 6.0 °C 20 minutes
F
Cannot be
used
F
Cannot be
used