54
A
1. Wrap it with the insulation tape twice or more and position your contraction tube in the
middle of the insulation tape.
Three or more layers of insulation are required.
f Method 1
1.57 inch
(40 mm)
Insulation tape
f Method 2
Insulation tape
1.38 inch
(35 mm)
2. Apply heat to the contraction tube to contract it.
Contraction tube
3. After tube contraction work is completed, wrap it with the insulation tape to nish.
Insulation tape
t In case of extending the electric wire, please DO NOT use a round-shaped Pressing socket.
- Incomplete wire connections can cause electric shock or a re.
WARNING
Extending the power cable
t Make sure that the connection parts are not exposed to outside.
t Be sure to use insulation tape and a contraction tube made of approved reinforced insulating
materials that have the same level of withstand voltage with the power cable. (Comply with
the local regulations on extensions.)
CAUTION
To Next Page
Loading...
