Samsung AM JXVHGH Series - Page 80

80
Electrical wiring work
Examples of how to use the cable striper
<Cable striper>
1. Adjust the blade position by coin. (Controller is at the bottom side of the tool.) Fix the
blade position according to the outer sheath thickness of the power cable.
2. Fix the power cable and tool by using the hook at the top side of the tool.
3. Cut out the outer sheath of the power cable by revolving the tool in the direction of the
arrow, two or three times.
4. At this situation, cut out the outer sheath of the power cable by moving the tool toward
the direction of the arrow.
5. Slightly bend the wire and pull out the cut part of the outer sheath.
Fixing the power cable
3 phase 4 wires
(380-415V~)
Sub unit communication cable
Sub unit 3 phase 380-415V~
ELCB
MCCB+
ELB
or
DVM S HE_IM_DB68-05461A-08_EN.indd 80 2017-03-24 오후 1:38:38