82
Electrical wiring work
Withdrawing the power cable
Withdrawing from the front side
- Connect the power cable protection tube into the power supply box as
shown picture.
- Be sure that the power supply cable is not damaged by burr on the
knock-out hole.
Installing the Solution device
When the number of indoor units installed with the outdoor unit is 16 or less
F1 F2 OF1 OF2 R1 R2
F1
Terminal block with
indoor unit
F2
OF1
Terminal block with
outdoor unit sub module
OF2
R1
Terminal block with
solution device
R2
DVM S HE_IM_DB68-05461A-08_EN.indd 82 2017-03-24 오후 1:38:40
To Next Page
Loading...
