12
English
Operation Features
At a Glance
Operation Features
Operating temperature and humidity
When using the air conditioner follow the operating temperature and humidity ranges.
Mode Outdoor temperature Indoor temperature Indoor humidity
Cool mode
Depending on the outdoor
unit specifications
ߢߩইAϩͱߤߣইA ߩߡͱθʪϑϑ
Heat mode ߤߡইAͱθʪϑϑ
-
Dry mode ߢߩইAϩͱߤߣইA
CAUTION
࡙ Ã˙цͱЇЇϑʪϩ˵ʪɇθʀͱʒϩͱʪθɇϩɇθʪɇϩЭʪ˵ЇʒϩцɇɵͱЭʪߩߡࡡϩɇцʀɇЇϑʪɇ˙ͱθɇϩͱͱ˙
condensation and a leakage of water on the floor.
࡙ Ɵ˵ʪθɇϩʪʒ˵ʪɇϩ˝ʀɇΧɇʀϩцϑɵɇϑʪʒͱɇͱЇϩʒͱͱθϩʪΧʪθɇϩЇθʪͱ˙ߨইAࢋÃ˙ϩ˵ʪͱЇϩʒͱͱθϩʪΧʪθɇϩЇθʪ
˝ͱʪϑʒͱиɵʪͱиߡইAࡡ˵ʪɇϩ˝ʪ˙˙ʀʪʀʪϑɇцʒʪʀθʪɇϑʪʒʪΧʪʒ˝ͱϩ˵ʪϩʪΧʪθɇϩЇθʪ
conditions.
࡙ If the indoor unit is out of the operating temperature and humidity range, the safery device may
operate and the air conditioner may stops.
Pairing an indoor unit with a remote control
When using multiple indoor unit, you can control individually pairing remote control and indoor unit.
Set by remote control when the indoor unit is off.
Zone 1~4 ࣍ߦϑʪʀ࣎
NOTE
࡙ After push the
, have to push within 60 seconds.
࡙ Each indoor unit number setting must be set by the installer when installing. Contact service
centre to reset indoor unit number.
To Next Page
Loading...
Need help?
General
