13
English
Cleaning and Maintenance
Cleaning and Maintaining
Cleaning the indoor unit exterior
Wipe the surface of the indoor unit with a tepid
damp cloth.
Remove the dust accumulated in the narrow
gaps of the product with a soft brush.
CAUTION
࡙ Do not use alkaline detergent, sulphuric
acid, hydrochloric acid, or organic solvents
(such as thinner, kerosene, and acetone) to
clean the surfaces.
࡙ Do not attach any stickers on the surfaces
because this may cause damage.
࡙ When you clean the heat exchanger on the
indoor unit, you need to disassemble the
indoor unit. Therefore, you must contact the
local service center for help.
Cleaning the outdoor unit heat exchanger
Spray water to clean the dust.
CAUTION
࡙ The heat exchanger of the outdoor unit has
sharp edges. Take care when cleaning its
surface.
NOTE
࡙ If it is difficult to clean the heat exchanger
of the outdoor unit, contact the local service
center.
Before cleaning the indoor unit, be sure to turn off the auxiliary power switch.
To Next Page
Loading...
