Disassembly and Reassembly
122 Samsung Electronics
No Parts Procedure Remark
5 Drain Pump
&
Hose
1) Remove the 2 fixed screws and dis-
connect the white drainage hose from the
Drain Pump. (Use +Screw Driver)
2) Remove the 2 screws and take the Drain-
Hose out from the indoor unit to disas-
semble the transparent Drain-Hose fixed on
the side of the indoor unit.
(Use +Screw Driver)
6Evap.
Temperature
Sensor
1) Use your hand to remove the temperature sensor
attached to the Evap Pipe along with the fixing
clip.
To Next Page
Loading...
