Disassembly and Reassembly
252 Samsung Electronics
No Parts Procedure Remark
1 FRONT VIEW
1) Stop the operation of the air conditioner
and disconnect the main power supply.
2 Control-BOX 1) Loosen 11 of the front screw(CCW) and
detach the Cabinet Front Up.
2) Disconnect the Connector Wire that is
connected to the indoor unit's PBA
3) Unscrew the 1 fixed screws on middle of
the PBA and 4 fixed PBA HOLDER, and
disassemble the PBA from the indoor
unit.
(Use + Screw Driver)
ŶV-AHU
- AM012/018/024/030/036/048/054/060/072JNZDCH/AA
To Next Page
Loading...
