Disassembly and Reassembly
144 Samsung Electronics
No Parts Procedure Remark
5) Detach the Evaporator from the set.
5 Control In
Detach the parts of Control In after disassem-
bling the Cover Control.
1)
Detach all the wires connected to the PCB.
2)
If only the disassembly of PCB required, press the
Pothook and detach the PCB from the set.
3)
If only the disassembly of Capacitor is
required,detach it from the set.
4)
If only the disassembly of Case Control is
required,detach it from the set after disassem-
bling 2 indicating screws.
To Next Page
Loading...
