Disassembly and Reassembly
258 Samsung Electronics
No Parts Procedure Remark
4 ASS'Y FRONT PANEL
&
DISPLAY PCB PART
1) Unscrew 4 FRONT PANEL BOTTOM screws.
(using + SCREW DRIVER)
2) Separates FRONT PANEL by pulling upwards.
3) Pilfer the wire from wire jam spot and leave
FRONT PANEL on a flat ground.
4) Separates wire from wire fixed holder on back
of FRONT PANEL.
5) Unscrew 4 DISPLAY COVER screws.
(using + SCREW DRIVER)
6) Unscrew a display PCB screw.
(using + SCREW DRIVER)
upwards
wire jam spot
wire fixed holder
To Next Page
Loading...
