Disassembly and Reassembly
3-98 Samsung Electronics
3-1-1 Floor Standing Type (EXPOSED)
No Parts Procedure Remark
1 Cabinnet 1) Please separate the DOOR HAND & the
DOOR BODY by pulling upwards.
2) Please unscrew the FRONT MID screw and
separate the FRONT MID by pulling down-
wards.
3)
Please unscrew the GRILLE screw and sepa-
rate the GRILLE.
4)
Please unscrew the FRONT MID Screw and
separate the FRONT MID.
5) Please unscrew the FRONT UPPER & the
FRONT SIDE screw and separate the FRONT
SIDE.
6) Please unscrew the FRONT UPPER screw
of the back side and separate the FRONT
UPPER.
– All the procedure has to be verified because the cover should not open when the unit is installed.
To Next Page
Loading...
