Samsung AM036JNCDCH - Page 27

27
ENGLISH
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
The option mode
you want to change
The tens’ digit of an
option SEG you will
change
The unit digit of an
option SEG you will
change
Changed value
Remote
Controller
Display
On
Auto
On
Auto
Cool
On
Cool
On
On
Dry
Indication and
Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
0D
Option
mode
1~6
Tens’ digit
of SEG
0~9
Unit digit
of SEG
0~9
The
changed
value
0~F
You can change each digit of set option.
NOTE
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
The option mode you
want to change
The tens’ digit of an
option SEG you will
change
The unit digit of an
option SEG you will
change
Changed value
Indication 0 D 2 1 7 1
t When changing a digit of an indoor unit address setting option, set the SEG3 as ‘A’.
t When changing a digit of indoor unit installation option, set the SEG3 as ‘2’.
Ex) When setting the ‘buzzer control’ into disuse status.
t If you are using heat pump model, mixed operation mode (two or more indoor units operating in
dierent operation mode simultaneously) is not available when the indoor units are connected
to same outdoor unit. If you set the master indoor unit with a remote controller, outdoor unit will
operate in the mode which was set in the master indoor unit.
Changing a particular option
CAUTION