3-116 Samsung Electronics
No Parts Procedure Remark
2 Drain Pan& Drain
Pump
1)
Disassemble the Cabinet Bottom Evap.
- Unscrew 7 screws.
2)
Pull the Drain Pan Out.
3)
Disassemble the drain Pump.
- Unscrew 5 screws and disassemble
2 conectors.
3 EVAP 1)
Disassemble the Support Evap.
- Unscrew 1 screws
2)
Disassemble the Cover Pipe.
- Unscrew 2 screws
3)
Disconnect the wire between assy control
out and Evap. (TEMP sensor, EEV)
To Next Page
Loading...
