56
Setting an indoor unit address and installation option
■ 05 series installation option(Detailed)
Option No. : 05XXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation
PAGE MODE
Remote Controller
Display
Indication and Details
Indication Details Indication Details
05
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Explanation PAGE
Compensation option
for Long pipe or height
diffference between
indoor units
Remote Controller
Display
Indication and Details
Indication Details Indication Details
1
0
Use default
value
1
1) Height
difference
1)
is more than
30m or
2) Distance
2)
is longer than
110m
2
1) Height
difference is
1)
15~30m or
2) Distance
2)
is
50~110m
1) Height difference : The difference of the height between the corresponding indoor uint and the indoor unit installed at the lowest place.
For example, When the indoor unit is installed 40m higher than the indoor unit installed at the lowest place, select the
option "1".
2) Distance : The difference between the pipe length of the indoor unit installed at the farthest place from an outdoor unit and the pipe length
of the corresponding indoor unit from an outdoor unit.
For example, when the farthest pipe length is 100m and the corresponding indoor unit is 40m away from an outdoor unit, select
the option "2". (100 - 40 = 60m)
k}tGokyvGo{ptXYWZ`]]hTXluUGGG\] YWXZTW_TW]GGG㝘㤸G`a[[a\Y