Disassembly and Reassembly
Samsung Electronics 175
No Parts Procedure Remark
3 Auto lift
Panel Kit
(Model name :
PC4NUX*AN)
(Continues)
5) Loosen the screws and remove the case
roller from the grill.
(A total of 4 locations, Using + Screw Driver.)
6) Remove the filter by pulling the hook.
7) Please Loosen the 2 screws to remove
the electrical device cover.
(Using + Screw Driver.)
8) Disconnect one connector wire and two
power wires for auto lift from the indoor
control unit.
(Using + Screw Driver.)
Be sure to turn off the power before working.
To Next Page
Loading...