Disassembly and Reassembly
176 Samsung Electronics
No Parts Procedure Remark
3 Auto lift
Panel Kit
(Model name :
PC4NUX*AN)
(Continues)
9) Loosen the screws and separate the wire-
Guide and grill.
(A total of 4 locations, Using + Screw Driver.)
10)
Remove the Case Control Upper by loosening
the 4 screws.
(Using + Screw Driver.)
11)
Hang the wire on the Roller as shown on the
right. After that, connect Spring Etc-Wire and
Wire as before disassembling.
※ Put the wire on the roller exactly at the
groove.
To Next Page
Loading...