20
Drain pipe and Drain hose Installation
Testing the drainage
Prepare a little water about 2 liters.
1. Pour water into the drain pan in the indoor unit as shown in gure.
2. Conrm that the water ows out through the drain hose.
3. When the drain pump is installed, operate the unit as cooling mode
and check a drain pump pumping.
The designs and shape are subject to
change according to the model.
Drain pan
4. Check drain water drops at the end of the drain pipe.
5. Make sure there is no water leak at the drainage.
6. Reassemble the cover of water supply intake.
Drain pipe
Drain water drops
NASA_Big Duct_AM@@@FNHDEH@_IM_03864A-05_EN.indd 20 2016-04-01 오후 5:29:44
To Next Page
Loading...
