11
No. Part Procedure Remark
Common Work
Fan and Motor
Heat Exchanger
and compressor
1
2
3
7) Loosen the fixing screws and separate
the cabinet side.
1) Loosen the fixing bolt and separate
the fan.
2) Loosen four fixing bolts to separate
the motor.
1) Release the refrigerant at first.
2) Disassemble the inlet and outlet pipe
by welding.
3) Loosen the fixing screws of the heat
exchanger.
4) Separate the heat exchanger.
5) Loosen four bolts of the compressor.
6) Separate the compressor.
AQ18A5(6)RC SM_E_15778 2/12/04 9:10 PM Page 11
To Next Page
Loading...
