To Next PageTo Next PageWhy is my Samsung AQV12A1ME Air Conditioner blowing air but not cooling?
If the Samsung Air Conditioner blows air but doesn't seem to be heating or cooling, a possible cause is that the selected temperature is too high (during cooling) or too low. Try lowering the selected temperature during cooling or raising it during heating to see if that resolves the issue.
What to do if the Samsung Air Conditioner remote controller does not operate?
If the remote controller for your Samsung Air Conditioner isn't working, it could be due to several reasons. The batteries might be dead or inserted incorrectly (+, -). Also, check if something is blocking the detection part of the indoor unit, or if radio interference from a neon sign is present.
Why is my Samsung Air Conditioner not turning on?
If your Samsung Air Conditioner isn't working, make sure that it is plugged in and that the power is on. Try unplugging it and plugging it back in after 2 minutes.
How to fix the flickering operation lamp on a Samsung Air Conditioner?
If the operation lamp on your Samsung Air Conditioner is flickering, try pushing the Operation / Stop button. If that doesn't work, unplug the power source and then plug it back in.
Why can't I set the temperature on my Samsung AQV12A1ME Air Conditioner?
The temperature on your Samsung Air Conditioner might not be settable if the unit is in Dry, Turbo, Sleeping, or Fan only Mode. Check again at the cooling/heating state. Also, during automatic operation, the standard temperature is ±2°C.
Why can't I adjust the fan speed on my Samsung AQV12A1ME Air Conditioner?
The wind volume on your Samsung Air Conditioner might not be adjustable if the unit is set to Auto, Dry, Turbo, or Sleeping mode. The temperature setting is not required since the wind volume is set automatically. Check again at the state of Cooling / Fan only / Heating.
Why does my Samsung Air Conditioner start automatically when plugged in?
When your Samsung Air Conditioner starts immediately after being plugged in without using the remote, it's likely due to the auto-restart function. This function memorizes the operation state during a blackout and restarts the unit with those settings when power returns.
General| Brand | Samsung |
|---|---|
| Model | AQV12A1ME |
| Category | Air Conditioner |
| Language | English |
Detailed performance and electrical specifications for different models.
Visual representation of indoor and outdoor unit dimensions.
Illustrates the refrigerant flow in cooling and heating modes.
Details on remote controller functions, operation modes, and timers.
Guidelines for selecting installation areas for indoor, outdoor, and remote units.
Procedure for refilling refrigerant after installation or leak.
Step-by-step guide for dismantling the indoor unit components.
Step-by-step guide for dismantling the outdoor unit components.
Fundamental checks for common operational issues.
Methods for identifying faults based on error indicators and displays.
Flowchart for diagnosing inverter air conditioner faults systematically.
Guide to diagnosing specific major components using resistance and voltage tests.
Procedures for setting model options after PCB replacement.
Illustrated breakdown and part list for the indoor unit.
Illustrated breakdown and part list for the outdoor unit.
Exploded views and parts list for remote control and PCB housing.
Detailed diagram of the indoor unit's main PCB.
Detailed diagram of the outdoor unit's control PCB.
Detailed diagram of the IPM (Intelligent Power Module) PCB.
Diagram for the EMI filter PCB.
Diagram for the display unit PCB.
Wiring schematic for the indoor unit.
Wiring schematic for the outdoor unit.
