Samsung AQV12EWAX - Page 9

Operating Instructions and Installation
3-6 Samsung Electronics
No Parts Procedur e Remark
4 PBA 8) Loosen the Relay #3 red-connector(RY71).
KCaution:
The terminal is locking type.
So, when you separate terminals,
pull pressing the button.
9) Loosen the Step motor connector.
KCaution:
When you separate the connector,
pull pressing the locking button.
10) Loosen the Thermistor wire connector(CN43).

KCaution:
When you take off the PBA, don’t touch
the components.
Please hold the PBA both side.
11) Loosen the Motor connector(CN71).
KCaution:
When you separate the connector,
pull pressing the locking button.
Button