Selecting Auto Mode
You can select Auto mode if you want to cool or heat your room automatically.
You can adjust the temperature in this mode.
1
Press the (On/Off) button.
Result
:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the button on the remote control until Auto is displayed.
Result
:
The indoor unit beeps each time you press the button.
The air conditioner runs in Auto mode.
Auto mode cools or heats the room depending on the set
temperature.
The air conditioner changes from Cool or Heat mode
automatically, depending on the current temperature.
Note You can change modes at any time.
3
Press the button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result
: Each time you press the button:
- The temperature adjusts by 1°C
- The indoor unit beeps
The fan speed adjusts automatically.
To Next Page
Loading...
