19
4-1. Indoor Unit
NO. Parts Procedure Remark
1 PANEL-FRONT
1) Stop the driving of air conditioner
and shut off main power supply.
2) Open the FRONT-GRILLE and pull
out from the PANEL-FRONT.
3) Detach COVER-TERMINAL from
the PANELFRONT.(use + Screw
Driver)
4) Loosen connector wire(white) and
detach the temperature sensor wire.
5) To detach the FRONT-PANEL the
main frame, unfasten 2 screw at the
bottom.(use + Screw Driver)
6) Take off the FRONT-
PANEL,lifting up the bottom.
To Next Page
Loading...
