Samsung AR 24 RXFPEWQX - Page 28

28
NO. Parts Procedure Remark
3)Removethexingpointsofthemo-
tor SCREW 2ea, please
disconnect the MOTOR turning coun-
terclockwise.
3 Capillary 1) Please remove the weld point in one
place. (COND-OUT)
If you remove the compressor and
heat exchanger, eliminate the refriger-
ant inside the compressor and heat
exchanger
completelywithweldingretoremove
the PIPE.
2) Please separate NUT SERVICE-
VALVE 2EA. (MONKEY SPANNER or +
SCREW DRIVER Use)
4 Condenser
(heat exchanger)
1) Please remove the welds in one
place.(COND-IN)