Samsung AR CSFC Series - To Set the Temperature to Adjust the Fan Speed to Adjust the Airflow Direction

15
English
At a GlanceAt a Glance
To set the temperature
To control the temperature in each mode, press the (Temperature)
button:
Mode Temperature control
AI Auto/Auto/
Cool
ʒЇϑϩɵцߣছ˙θͱߨߣছϩͱߪߨছ࣑ߣߨঙϩͱߥߢঙ࣒࢏
Heat ʒЇϑϩɵцߣছ˙θͱߦߩছϩͱߪߨছ࣑ߪঙϩͱߥߢঙ࣒࢏
Dry ʒЇϑϩɵцߣছ˙θͱߨߧছϩͱߪߨছ࣑ߣߪঙϩͱߥߢঙ࣒࢏
Fan No temperature control.
To adjust the fan speed
Select from the following fan speeds in each mode:
Mode Available fan speeds
AI Auto/Auto/
Dry
(Auto)
Cool/Heat
(Auto), (Low), (Med), (High),
࣑ƟЇθɵͱ࣒
Fan
(Low), (Med), (High), (Turbo)
To adjust the airflow direction
Keep the airflow in a constant direction by stopping the movements
of the vertical and horizontal airflow blades.
In operation 
or
NOTE
࡛ If you adjust the vertical airflow blade manually, it may not close
completely when you turn off the air conditioner.
࡛ Always use the remote control to adjust the airflow blades. Do
not move the blades by hand. They may not operate normally.
࡛ You cannot control the vertical airflow direction in Cool mode
when the good'sleep function is on.