21
English
Smart FeaturesSmart Features
Heat mode
Use Heat mode to stay warm.
Select Heat.
NOTE
࡛ While the air conditioner warms up, the fan may not operate for
about 3 to 5 minutes at the beginning to prevent cold blasts.
࡛ If the air conditioner heats insufficiently, use an additional
heating appliance in combination with the air conditioner.
Automatic defrost
When the outdoor temperature is low and the humidity is high, frost
may develop on the outdoor heat exchanger, which may decrease
heating efficiency. When these conditions are met while Heat mode
is on, the air conditioner runs the Defrost function for 5 to 12 minutes
to remove frost from the outdoor heat exchanger.
NOTE
࡛ When the Defrost function is on, the (Defrost) indicator
appears
on
the indoor unit display, steam is produced on the
outdoor unit, the airflow blades do not move. (Note that on the
Free Joint Multi systems, the blades move to the lowest position.
After defrost operation is complete, the blades return to the angle
set by the user.)
࡛ You cannot select other functions with the remote control until
the Defrost function is finished.
To Next Page
Loading...
Need help?
General
