Samsung AR CSFC Series - Cleaning the WindFree Panel

35
English
Cleaning and MaintenanceCleaning and Maintenance
Cleaning the WindFree panel
Clean the WindFree panel at least once a month.
1 Pull the airflow blade open.
2 Hold and pull both sides of the WindFree panel until it comes free from the air conditioner.
3 Use a soft brush or vacuum cleaner to remove any dust.
4 ²ɇ˝ϩ˵ʪWindFreeΧɇʪϩ˵ʪ˝θͱͱЭʪϑɇϩϩ˵ʪɵͱϩϩͱʪ˙ϩɇʒθ˝˵ϩ࢏
5 Align the projections of the WindFree panel with the grooves at the top, middle, and bottom of the front
panel.
6 After inserting the WindFree panel, press the top 4 places and the bottom 3 places, indicated in the
figure above, by hand so that there is no gap to the panel.
CAUTION
࡛ If you attach the WindFree panel without the airflow blade being open, it may become obstructed by the
WindFree panel and may not open properly.