22 English
Energy-Saving Features
Single user function
Use the Single user function to reduce electricity consumption
while staying cool or warm. You can select this function in the
Cool and Heat modes.
In the Cool or Heat mode
Ź Ź Ź
Select Single user.
Ź
NOTE
ŷ When the Single user function starts, the
pattern
appears on the remote control for a few seconds, and
vertical air swing begins automatically.
ŷ If you select the Single user while such function as 2-Step
cooling, Fast, Comfort, Quiet, or good'sleep are running,
these modes are cancelled.
ŷ After selecting the Single user function, you can change
the set temperature (76 °F to 86°F(24 °C to 30 °C) in the
Cool mode, 61 °F to 86°F(16 °C to 30 °C)in the Heat mode),
fan speed, and vertical air flow direction.
ŷ When the Single user function is turned on in the Cool
mode while the set temperature is set to lower than 76
°F(24 °C), the set temperature is automatically raised to 76
°F(24 °C). But if the set temperature is set to between 77°F
and 86°F(25 °C and 30 °C), it remains the same.
ŷ Even after you turn off the Single user function, vertical
air swing continues until you turn it off with the Vertical
air swing (
) button.
Energy-Saving Operation
To Next Page
Loading...