How to fix a Samsung AR RXFP that does not turn on?
If your Samsung Air Conditioner doesn't work, check the power status and try operating it again. Ensure the circuit breaker is on, the power cord is plugged in, and the isolator is turned on. Also, verify that the Timed off function isn't running; if it is, press the Power button to restart the unit.
Why is my Samsung AR RXFP Air Conditioner not blowing cold or hot air?
If cool or warm air isn't coming from your Samsung Air Conditioner, first ensure the set temperature is appropriately adjusted in Cool or Heat mode relative to the current temperature. Also, check if the air filter is dirty and clean it regularly. Remove any coverings or obstacles from the outdoor unit. The unit may be running the defrost function, during which the indoor fan stops and warm air doesn't come out. Ensure doors and windows are closed, and that the unit wasn't just turned on after cooling or heating, as it may only run the fan to protect the compressor. Finally, verify that the pipe length doesn't exceed the maximum length, which can decrease performance.
What to do if the Samsung Air Conditioner remote control does not work?
If your Samsung Air Conditioner remote control isn't working, try replacing the batteries with new ones. Make sure nothing is blocking the remote control sensor. Check for strong lighting nearby, as light from fluorescent bulbs or neon signs may interfere with the signal.
Why is my Samsung AR RXFP leaking water from the outdoor unit?
If you see water dripping from the pipe connections of the outdoor unit of your Samsung Air Conditioner, this is likely due to condensation that develops when the ambient temperature changes excessively, which is a normal operation.
Why I cannot change the temperature on my Samsung AR RXFP?
If you cannot change the temperature on your Samsung Air Conditioner, check if it's running in Fan or Fast mode. In these modes, the air conditioner automatically controls the temperature, preventing manual adjustments.
Why isn't the timer working on my Samsung AR RXFP?
If the Timed on/off function on your Samsung Air Conditioner isn't working, ensure you pressed the SET button on the remote control after setting the time.
What to do if my Samsung AR RXFP shows an error code?
If your Samsung Air Conditioner is indicating an error, contact the nearest service centre and provide them with the error code displayed, especially if the indoor unit indicator blinks.
Why can't I change the fan speed on my Samsung Air Conditioner?
If you cannot change the fan speed on your Samsung Air Conditioner, it may be because the unit is running in Auto, Dry, or Fast mode, or the good'sleep function is running in Cool mode. In these modes, the air conditioner automatically controls the fan speed.
Why I cannot change the air flow direction on my Samsung Air Conditioner?
If you cannot change the airflow direction on your Samsung Air Conditioner, check whether the good'sleep function is running. While this function is running, you cannot control the air flow direction, unless it is running in the Heat mode.
Why does my Samsung AR RXFP smell?
If you find that odors permeate in the room when your Samsung Air Conditioner is running, check if the unit is operating in a smoky area. Ventilate the room or run the air conditioner in Fan mode for 3 to 4 hours. Also, ensure the drains are clean and maintained regularly.
General| Brand | Samsung |
|---|---|
| Model | AR RXFP Series |
| Category | Air Conditioner |
| Language | English |
To Next Page
