14
English
Installation
WARNING
• In case of extending the electric wire, please
DO NOT use a round-shaped
pressing socket.
– Incomplete wire connections
can cause electric shock or
a fire.
Step 2.3 Installing and connecting
the drain hose
1 Install the drain hose.
2 Pour water into the drain pan. Check whether the
hose is well drained.
CAUTION
• Make sure that the indoor unit is in upright
position when you pour water to check for leakage.
Make sure that the water does not overflow onto
the electrical part.
• If the diameter of the connection hose is smaller
than the product's drain hose, water leakage may
occur.
• Inadequate installation may cause water leakage.
• If the drain hose is routed inside the room,
insulate the hose so that dripping condensation
does not damage the furniture or floors.
• Do not box in or cover the drain hose connection.
Drain hose connection must be easily accessible
and serviceable.
Step 2.4 Optional: Extending the
drain hose
Drain hose Assembly pipe Connection hose
Indoor unit
Drain hose
Wall
5 cm
less
Ditch
Slant downwards Slant upwards Dipped in water
Bent
Too small clearance
Too small
clearance
Drain hose (A) Extension drain hose (B)
Drain hose
Extension drain hose
20 mm or more
Foam insulation
Vinyl tape
40~45mm
To Next Page
Loading...
