Samsung AR RXFP Series - Information about Refrigerant; Error Indicators and Noise; Refrigerant Handling Precautions

19
English
Installation
If using a multi system, install as described in the
installation manual supplied with the outdoor unit.
Step 3.1 Fixing the outdoor unit in
place
X
Y
1 Place the outdoor unit as directed on the top of
the unit to let the discharged air out properly.
2 Fix the outdoor unit in level to an appropriate
support using anchor bolts.
NOTE
• Secure the rubber legs to help prevent the
generation of noise and vibration.
• If the outdoor unit is exposed to strong winds,
install shield plates around the outdoor unit so
that the fan can operate correctly.
Optional: Fixing the outdoor unit to a wall with a
rack
NOTE
• Make sure that the wall can support the weights
of the rack and the outdoor unit.
• Install the rack close to the column as much as
possible.
Step 3.2 Connecting the power
and communication cables and the
refrigerant pipes
F1 F2
L N
CAUTION
• Be sure to fix the power cables and communication
cable with a cable clamp.
Outdoor Unit Installation
(Unit : mm)
Model X Y
**09*******
**12*******
436 265
**18*******
**24*******
660 340
Outdoor-to-indoor
power cable
(three wires)
Communication cable
(two wires)
Power cable
(three wires)
Soft rubber designed to cut off vibration from
rack to wall (not supplied with product)
Soft rubber designed to cut off residual vibration
from outdoor unit to rack (not supplied with product)
Rubber leg