English-22
Using the Single User function
This function will reduce the energy usage while the air conditioner is operating in Cool mode.
When the air conditioner is operating in Cool mode;
Remote controller display
Press the Single user button.
- (Single user) indicator will be displayed on the remote controller display. Then
will be displayed on the set temperature indicator part for few
seconds and Single user function will begin.
- When the Single user function is on, vertical air swing will turn on automatically.
- If the current set temperature is lower than 24°C in Cool mode, it will be
automatically raised to 24 °C.
Cancel
Press the Single user button once again.
• Single user function is only available in Cool mode.
• If the Single user function is selected while 2-Step Cooling/Fast/Comfort /
function is on, corresponding function will be cancelled.
• Vertical air swing will remain on even after the Single user function
is cancelled.
• Select or cancel the Single User function with the Options button.
- Press the Options button press the
, or Options button to
make (Single user) indicator blink and press the SET button.
Additional options available in Single user function
You can adjust the set temperature by 1 °C within the range of 24 °C ~ 30 °C in Cool mode.
(Auto), (Low), (Med), (High), (Turbo) can be selected.
Vertical air swing can be selected.
SG_GOOD_A3050_IB&IM_EN_DB68-05200A-03.indd 22 2/2/2016 8:26:08 AM
To Next Page
Loading...