3-8 Samsung Electronics
No Parts Procedure Remark
6 FAN MOTOR
&
CROSS FAN
1) Unfasten the screw in the HOLDER-EVAP on the
left side of evaporator.(use + Screw Driver)
2) unfasten the 3 points screws in the CASE-
CONTROL, and then detach the CASE.
(use + Screw Driver)
3) unfasten the screw a little.(use + Screw Driver)
4) Lift up the evaporator slightly and
pull the CROSS-FAN to the left side.
Operating Instructions and Installation
To Next Page
Loading...
