What to do if my Samsung AS18A0RCFD compressor stops intermittently in Cool or Dry mode?
The compressor might stop intermittently, or the indoor unit's fan speed might decrease to prevent the inside/outside air from freezing, depending on the inside/outside air temperature. This is normal operation.
Why is my Samsung AS18A0RCFD Air Conditioner fan speed not working in Auto or Dry mode?
In Dry mode, the indoor fan speed is automatically set to LL (Low-Low). In Auto mode, the fan speed is automatically selected from five available steps.
Why does my Samsung AS18A0RCFD compressor stop intermittently in Dry mode?
In Dry mode, the compressor is automatically controlled based on the room temperature and humidity. This intermittent stopping is a normal part of the Dry mode operation.
What to do if my Samsung AS18A0RCFD Air Conditioner STD operation indicator LED blinks?
The blinking LED indicates that power is on. To stop the blinking, press the On/Off button on the remote control.
What to do if the compressor of my Samsung Air Conditioner doesn't operate in Cool mode?
If you are in Cool mode and the room temperature is higher than the set temperature, the compressor will reoperate after three minutes.
General| Brand | Samsung |
|---|---|
| Model | AS18A0RCFD |
| Category | Air Conditioner |
| Language | English |
User installation restrictions and importance of authorized professional installation.
Essential checks for voltage, connections, and operational indicators before diagnosing.
Flowcharts and guides for diagnosing issues based on observed symptoms and unit behavior.
Steps for replacing the main PCB module, including post-replacement setup.
Schematic showing the arrangement of components on the main printed circuit board.
To Next Page
