What to do if all LEDs are blinking on my Samsung Air Conditioner?
If all the LEDs on your Samsung Air Conditioner's indoor unit are blinking (1Hz), it indicates an Option Error. This means the option wasn’t set up correctly or there's an issue with the option data. Ensure the options are properly configured.
What does it mean when STD, BIO, and TIMER LEDs are blinking on a Samsung AS18A9RCF?
If the STD, BIO, and TIMER LEDs are blinking (1Hz) on your Samsung Air Conditioner indoor unit, this indicates an EEPROM Error.
Why is the BIO LED blinking on my Samsung AS18A9RCF Air Conditioner?
If the BIO LED is blinking (1Hz) on your Samsung Air Conditioner indoor unit, it means the indoor fan is malfunctioning, specifically its speed is below 450rpm.
What does it mean when the TIMER LED is blinking on my Samsung AS18A9RCF?
If the TIMER LED is blinking (1Hz) on your Samsung Air Conditioner indoor unit, it suggests an error with the indoor unit's room sensor. This could be due to an open or short circuit.
How to fix STD LED blinking on Samsung AS18A9RCF?
If the STD LED is blinking (1Hz) on your Samsung Air Conditioner indoor unit, try restoring it from a power failure by inputting initial power.
What to do if my Samsung AS18A9RCF Air Conditioner compressor stops intermittently in Cool or Dry mode?
The compressor might stop intermittently, or the indoor unit's fan speed might decrease to prevent the inside/outside air from freezing, depending on the inside/outside air temperature. This is normal operation.
Why is my Samsung AS18A9RCF fan speed not working in Auto or Dry mode?
In Dry mode, the indoor fan speed is automatically set to LL (Low-Low). In Auto mode, the fan speed is automatically selected from five available steps.
Why does my Samsung AS18A9RCF Air Conditioner compressor stop intermittently in Dry mode?
In Dry mode, the compressor is automatically controlled based on the room temperature and humidity. This intermittent stopping is a normal part of the Dry mode operation.
What to do if my Samsung Air Conditioner STD operation indicator LED blinks?
The blinking LED indicates that power is on. To stop the blinking, press the On/Off button on the remote control.
What to do if the compressor of my Samsung Air Conditioner doesn't operate in Cool mode?
If you are in Cool mode and the room temperature is higher than the set temperature, the compressor will reoperate after three minutes.
General| Cooling Capacity | 1.5 Ton |
|---|---|
| Refrigerant | R410A |
| Compressor Type | Rotary |
| Warranty | 1 Year on Product, 5 Years on Compressor |
| Power Supply | 220-240V, 50Hz |
| Weight (Outdoor Unit) | 32 kg |
| Type | Split Air Conditioner |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Noise Level (Outdoor) | 55 dB |
To Next Page