Samsung AS24U Series - How to Connect Your Extended Power Cables

39
How to connect your extended power cables
metI s to prepare
(compressor and insulation tape should be prepared by an installation technician.)
1.
of the power cable.
-
2. Insert both sides of core wire of the power cable into the connection sleeve.
3.
and compress another two points in the same location.
- The compression dimension should be 8.0.
tfA - er compressing it, pull both sides of the wire to
4. Wrap it with the insulation tape twice and position your
contraction tube in the middle of the insulation tape.
5. Apply heat to the contraction tube to contract it.
6. After tube contraction work is completed, wrap it with the
Tools Crimping plier Connection sleeve (mm) Insulation tape Contraction tube (mm)
Spec
MH-14 20xØ7.0(HxOD) Width 18mm 50xØ8.0(LxOD)
Shape
40mm
Insulation tape
Contraction tube
(Unit: mm)
120
60
202020
180
Power cable (provided by us)
20
Wire tube power cable
Connection sleeve
Comp. dim.
Compress it 4 times
5mm
Insulation tape
• After peeling the tube wire, you must insert a contraction tube.
• In case of extending the electric wire, please DO NOT use a round-shaped pressing socket.
-
ENGLISH