Samsung AS24UUQ - User Information and Product Removal; Providing User Information; Pump Down Procedure for Removal

38
Providing Information for User
Pump Down Procedure (When Removing The Product)
After nishing the installation of the air conditioner, explain the following to
the user:
1
How tostart and stop the air conditioner
2
How to select the modes and functions
3
How toadjust the temperature and fan speed
4
How toadjust the airowdirection
5
How tosetthe timers
6
How toclean andreplacethe lters
1.
Turn on the air conditioner and select Cool mode to run the compressor
for 3 minutes.
2.
Release the valve caps on High and Low pressure side.
3.
Use L wrench to close the valve on the high pressure side.
4.
Approximately 2 minutes after, close the valve on the low pressure side.
5.
Stop operation of the air conditioner.
6.
Disconnect the pipes.
• When you complete the installation successfully, hand over this manual to the user for storage in a handy and safe
place.