Before Starting (Initial Setting)
1.
Turn
on
your
TV
after connecting the
player.
(When
the
player
is
connected to
TV
for
the
first
time,
player
will
turn
on
automatically
and
the
Initial
Settings
screen
will
be
displayed.)
2.
Press
the
& • buttons to select desired
language,
then
press
the
ENTER
button.
3.
Press
the
ENTER
button to select Start button.
4.
Press
the & • buttons to select
the
desired
TV
Aspect
ratio,
then
press
the
ENTER
button.
5.
Press
the
~
~
buttons to
the
select
the
desired Network
Settings: Wired, Wireless
or
PSC
(WPS),
then
press
the
ENTER
button.
The
Network Test
will
start
and
Initial
Settings
will
be
completed.
6.
Press
the
OK
button.
The
horne
menu
will
be
displayed.
~
NOTE
•
When
the
player
is
connected
to
TV
for
the
first
time,
player
will
turn
on
automatically.
Do
not
confuse
because
this
is
not
malfunction.
•
The
home
menu
will
not
be
displayed
if
you
do
not
configure
the
initial
settings.
•
If
you
press
the
BLUE(D)
button
during
the
network
setup,
you
can
access
the
home
menu
even
if
the
network
setup
is
not
completed
yet.
Playing a Disc
1.
Press
the OPEN/CLOSE (
CD
)button to
open
the disc
tray.
2.
Place
a disc gently
into
the tray with
the
disc's
label
facing
up.
3.
Press
the OPEN/CLOSE (
CD
)button to
close
the
disc
tray.
4.
Press
the PLAY
(G)
button.
Playback related buttons
PLAY
( G )
Starts
playback.
Stops
playback.
•
If
pressing
the
button
once:
The
stop
position
STOP
(0)
will
be
memorized.
•
If
pressing
the
button
twice:
The
stop
position
will
be
not
memorized.
PAUSE
(0)
Pauses
playback.
Software Upgrade Notification
When
connected to
the
network,
the
player
will
notice
you
of
any
new
software with a popup
message.
1.
Turn
on
the
player.
2.
From
the Software Upgrade
menu,
set
Auto Upgrade
Notification to
On.
If
there
is
a
new
software
version
available,
the
player
will
notice
you
with a popup
message.
3'jTO
upgrade
the
firmware,
select
Yes.
It
will
turn off automatically
before
restarting.
(Never
turn
it
on
manually.)
4.
The
update progress popup
will
appear.
When
the
update
is
completed,
it
will
turn
back off automatically.
5.
Press
the
POWER
button to
turn
on
the
player.
~
NOTE
•
Update
will
be
completed
when
the
player
turns
off
after
restarting.
Press
the
POWER
button
to
turn
on
the
updated
player
for
your
use.
Never
turn
off
or
on
the
player
manually
during
the
update
process.
•
Samsung
Electronics
shall
take
no
legal
responsibility
for
player
malfunction
caused
by
unstable
of
internet
connection
or
consumer
negligence
during
software
upgrade.
0-
English
AK68-01855C-01
To Next Page
Loading...
