Tourof the RemoteControl
Turn the player on and off,
Press to open and close the disc tray,
Turn the TV on and off.
After setup, allows you to set the input
source on your TV.
TV volume adjustment,
press the number buttons to operate
options
Use to enter the disc menu,
Press to skip backwards or forwards.
Press to stop a disc.
Press to play a disc.
Use to access various audio functions on
a disc (Biu-ray DJsdDVD),
Press to use the Tools menu,
Use to select menu items and change
menu values.
Return to the previous menu.
These buttons are used both for menus
on the player and also several Blu-ray Disc
functions
Press to use the bonusview function.
Allows you to repeat A-B disc,
Use to enter the popup menu/title menu,
Press to search a disc backwards or
forwards.
Press to pause a disc,
Press to move to the Home menu,
press to switch the giu-ray DisGDVD's
subtitle language.
Use to display the playback information
when playing a 8]u-ray DisGDVDs,
Press to exit the menu.
Press to see the full screen on a T_
During Blu-ray DisUDVD playback, The
full Screen button does not operate,
A]Jows you to repeat a title, chapter,
track, or disc,
Installing batteries
%_ NOTES
tf the remote d0es not operate properly:
Check the polarity (+/-) of the batteries
* Check if the batteriesaredrained.
* Checkifthe remotesensorisblocked byobstades.
* Checkifthereisanyfluorescentlightingnearby
CAUTION
, Disposeof b_eriesaccordingto localer_,ir0nmental
regulations.Donot putthem inthe ho_eholdtrash.
• Do not disposeof batteries in afire,
• Do not short cireuit,disassembleoroverheatthe
batteries.
• Dangerof exNosionif batteryisinco_edtYreplaced.
Replaceontywith the sameor equivalenttype.
Connections
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the
product to the HDMI IN jack on your TV.
- Do not connect the power cord to the wail outlet until you have made a]] the other
connections
- When you change the connections, turn off all devices before you starL
%_ NOTES
• If you use an HDMFto-DVI cane to connect to your display device, you must ago connect
the Digital Audio Out on the player to an audio system to hear audio.
• An HDMI cable outputs digital video and audio, soyou don't need to connect an audio cable,
• Depending on your TV,certain HDMI output resolutions may not work. Pleaserefer to the
user manual of your TV,
• When you connect the player to your TV using the HDMI cane or to a new TV,and then
turn it on for the first time, the player automatically sets the HDMI output resolution to the
highest supported by the TV,
• A long HDMIcablemaycausescreennoise,Ifthis occurs,setHDMIDeepColorto Off inthe menu,
• Toview video in the HDM1720p, t080i, or t080p output mode, you must usea High
speed HDMI cane,
• HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP(High-bandwidth Digital Content Protection), random
noise appears on the screen.
To Next Page
