Before You Begin
Setting the clock
When power is first supplied to the oven, the display on the control panel will light briefly.
After 3 seconds, an icon of a clock and 12:00 will begin blinking in the display. The oven
cannot be operated until the clock is set.
1
The oven is inoperable until the clock
has been set. “
” and “12:00” will
blink in the display when power is first
supplied to the appliance. Press the
Clock Button. The “ ” and “12: ”
will blink.
2
Turn the Time / Temp Control Knob
to set the hour of the day.
Example To set 1:30
3
Press the Clock Button. The “ ”
and “ :00” will blink.
4
Turn the Time / Temp Control Knob
to set the minute of the time. “ ” will
blink.
5
Press the Clock Button to finish setting the clock or wait for about 10 seconds. “ ”
will disappear and “30” will stop blinking. The display shows the time of day. The appli-
ance is now ready to use.
To Next Page
Loading...
