Samsung CE325KF - Replacement of Door Assembly

4-3-4 Removal of Key Door & Spring
Remove pin hinge from Door "E"
Detach spring from Door "E" and key door.
4-3-5 Removal of Screen-Door & Sub-Door
1. Remove Door"E" from Door"A".
2. Remove Door-Screen"B" and Sub Door.
4-2 Samsung Electronics
Disassembly and Reassembly
4-3 Replacement of Door Assembly
4-3-1 Removal of Door Assembly
Remove screws securing the upper hinge and
lower hinge. Then remove the door assembly.
Insert flat screwdriver into the gap between Door
"A" and Door "C" to remove Door "C". Be careful
when handling Door "C" because it is fragile.
Following the procedure as shown in the figure,
insert and bend a thin metal plate between Door
"E" and Door "A" until you hear the 'tick' sound.
1. Insertion depth of the thin metal plate should be
0.5mm or less.
4-3-2 Removal of Door "C"
4-3-3 Removal of Door "E"
Upper Hinge
Lower Hinge
Screw
Screw
Door "C"
Door "A"
Door-Sub
Door "E"
Key Door
Spring
Door "E"