Why is my Samsung Microwave Oven not heating food properly?
If your Samsung Microwave Oven is taking longer to cook food, it could be due to a decrease in power source voltage, an open or loose wiring of the magnetron filament circuit (causing intermittent oscillation), or the aging of the magnetron. It is recommended to consult an electrician.
Why Samsung CE325KF does not accept key input?
If your Samsung Microwave Oven does not accept key input, it could be because the key input is not in sequence, there is an open or loose connection of the membrane key pad to the Ass'y PCB, the membrane panel is shorted or open, or the Ass'y PCB is defective. Refer to the operation procedure and replace the PCB main.
What to do if Samsung Microwave Oven can program but timer does not start?
If your Samsung Microwave Oven can be programmed but the timer doesn't start, the issue might be due to open or loose wiring of the secondary interlock switch, off-alignment of the primary interlock, or a defective secondary interlock S/W. Adjust the door and interlock switches.
How to fix Samsung CE325KF turntable motor that does not rotate?
If the turntable motor in your Samsung Microwave Oven doesn't rotate, it could be due to open or loose wiring of the turntable motor or a defective turntable motor. Check the wire of the turntable motor and replace the turntable motor.
Why is my Samsung CE325KF sparking?
Sparks in your Samsung Microwave Oven can be caused by metallic ware or cooking dishes touching the oven wall, or ceramic ware trimmed with gold or silver powder. Do not use any type of cookware with metallic trimming.
What to do if my Samsung CE325KF timer starts countdown but no microwave oscillation?
If the timer on your Samsung Microwave Oven counts down but there's no heat, while the oven lamp and fan motor are on, the issue could be due to: 1. Off-alignment of latch switches. 2. Open or loose connection of the high voltage circuit, especially the magnetron filament circuit. Large contact resistance can lower magnetron filament voltage, causing lower output or intermittent oscillation. 3. Defective high voltage components such as the H.V.Transformer, H.V.Capacitor, H.V.Diode, H.V.Fuse, or Magnetron. 4. Open or loose wiring of the power relay. 5. Defective primary latch switch. 6. Defective power relay or Ass'y PCB. Adjust the door and latch switches. Check the high voltage components and replace any defective ones. Consider replacing the PCB main.
What to do if my Samsung CE325KF stops operation during cooking?
If your Samsung Microwave Oven stops during cooking, it may be due to open or loose wiring of the primary interlock switch, or the operation of the thermal cutout (Magnetron). Adjust the door and latch switches.
How to fix loud buzzing noise in Samsung CE325KF?
A loud buzzing noise in your Samsung Microwave Oven can be caused by loose fan and fan motor, loose screws on the H.V.Transformer, or a shorted H.V.Diode. Try tightening the screws of the fan motor and H.V.Transformer. If the noise persists, replace the H.V.Diode.
What to do if my Samsung CE325KF is completely dead?
If your Samsung Microwave Oven is completely dead (no display, no operation) and the fuse is OK, the cause could be an open or loose lead wire harness, an open thermal cutout (Magnetron), an open low voltage transformer, or a defective Ass'y PCB. Check the fan motor when the thermal cutout is defective. Check Ass'y PCB when LVT is defective.
What to do if my Samsung CE325KF has no display and doesn't operate, and the fuse is blown?
If your Samsung Microwave Oven has no display, doesn't operate, and the fuse is blown, it could be due to a shorted lead wire harness, a defective primary latch switch, a defective monitor switch, a shorted HVCapacitor, or a shorted HVTransformer. Check the adjustment of the primary, interlock monitor, power relay, and door sensing switch.
General| Brand | Samsung |
|---|---|
| Model | CE325KF |
| Category | Microwave Oven |
| Language | English |
To Next Page
