Using the Auto Reheat & Cook Feature
The Auto Reheat & Cook(
( )
feature has ten pre-programmed
cooking times. You do not need to set either the cooking times or
the power level.
You can adjust the size of the serving by pressing the Dish button.
☛ Use only recipients that are microwave-safe.
1 Open the door.
2 Place the food in the centre of the glass plate.
3 Close the door.
4 Select the type of food that you are cooking by pressing the Aufwärm-und
Garprogramme( ) button and turn the dial knob to select proper
auto item( 1 to 10 ). Refer to the table on the following page for a
description of the various pre-programmed settings.
5 Select the size of the serving by pressing the Aufwärm-und
Garprogramme( ) button one or more times.
6 Increase or decrease the cooking time, if necessary, by pressing the
Plus/Minus ( ) buttons respectively.
7 Press Start ( 1min+) button.
Result: The food is cooked according to the pre-programmed setting
selected.
◆ When the cooking time is over, the oven will be oven
beeping and flashing “:0” four times. And the oven will
beeps every one minute.
◆ If the door is open, or the Stop ( ) button is pressed,
current time will be displayed.
14
GB
1 CE325KF total 5/14/99 3:05 PM Page 14
To Next Page
Loading...
