E-14
Bio-Pure Filter Installation (Optional)
Open the front grille by pulling the tabs on the grille.
2
Remove the front grille.
3-1 Remove the safety clips.
3-2 Open the front grille about 45° and pull it forward.
3
Pull out the air filter.
4
Locate the bio-pure filter on the center of air filter.
5
Secure the bio-pure filter with four screws.
6
Reinstall the air filter, the front grille and the safety clips.
7
◆
Do not remove the packing from a bio-pure filter until you
wish to use the filter, as it will lose its properties.
NN
NN
oo
oo
tt
tt
ee
ee
The air conditioner can be fitted with a Bio-Pure filter to remove minute dust
particles. The service life of the filter is approximately 3 months depending on
the time during which the air conditioner is used.
Remove the vinyl packing from the filter.
1
To Next Page
